Project detail
Plasma surface treatments of glass fibres for polymer composites
Duration: 01.01.2000 — 31.12.2002
Funding resources
Czech Science Foundation - Standardní projekty
- whole funder (2000-01-01 - not assigned)
On the project
Description in English
It is generally accepted that the glass fibre reinforced polymer composites are the most viable candidates for replacing structural steel and other traditional materials in engineering applications. Thin boundary layers (interphases) between the fibre anthe polymer matrix are the most decisive with respect to the performance of both general use and high-tech fibrous composite material. Silane surface treatments of the glass fibres are commonly used in industrial processes to improve the stress transmission from the matrix into the fibre. However, the formed siloxane bonds are hydrolytically unstable, which results in worsening of mechanical properties of the composite in the presence of water and, eventually, in failure of the material. Therefore, thesilane layer should be replaced with a hydrolytically stable interphase. Thin films of plasma polymers seem to be the most promising candidates to fulfill this condition. The goal of this project is to understand a background of the
Mark
GA104/00/0708
Default language
Czech
People responsible
Čech Vladimír, prof. RNDr., Ph.D. - principal person responsible
Units
Faculty of Chemistry
- (2001-01-01 - not assigned)
Results
ČECH, V.; PŘIKRYL, R.; SALYK, O. Thin Plasma Polymer Films Of Hexamethyldisiloxane. In Proceedings of WDS 2000. Praha: UK Praha, 2000. p. 318 ( p.)ISBN: 80-85863-59-6.
Detail
SVĚRÁK, T. Fine mineral coated fillers comminution process control. In CD Proceedings of the JMP conference Comminution 04. PERTH,AUSTRALIA: Journal of Mineral Processing (U.K.), 2004. p. P01-01 (P01-13 p.)
Detail
PŘIKRYL, R., BÁLKOVÁ, R., SALYK, O., VANĚK, J. Low Temperature Plasma for Surface Modification of Glass Substrates. In 13th Symposium on Application of Plasma Processes. Bratislava: Comenius University, Bratislava, 2001. p. 128 ( p.)ISBN: 8022315737.
Detail
ČECH, V. Contemporary Course in Composite Interphases. In XXI. Vyztužené plasty. Plzeň: Dům techniky Plzeň, 2001. p. 103 ( p.)
Detail
BÁLKOVÁ, R., PŘIKRYL, R., SALYK, O. Plasma-Polymerized Thin Films of Hexamethyldisiloxane Prepared at Low RF Power. In 15th Int. Symposium on Plasma Chemistry. Orleans, France: GREMI, CNRS/University of Orleans, 2001. p. 1747 ( p.)
Detail
ČECH, V. Plasma Surface Treatment and Modification of Fibres for Fibre-Reinforced Polymer Composites. In 15th Int. Symposium on Plasma Chemistry. Orleans, France: GREMI, CNRS/University of Orleans, 2001. p. 2341 ( p.)
Detail
JANČA, J., SŤAHEL, P., BUCHTA, J., KRČMA, F., LAPČÍK, L. Plasma Surface Treatment of Synthetic Textile Fibres for Improvement of Car Tires. In Proceedings of HAKONE VII. Greifswald: 2000. p. 470 ( p.)ISBN: 3-00-006603-9.
Detail
BÁLKOVÁ, R. Surface modification of fibers for polymer composites. In WDS'01, Procedings of Contributed Papers, Part III. Praha: Matfyzpress, 2001. p. 634 ( p.)ISBN: 8085863731.
Detail
ČECH, V., PŘIKRYL, R., BÁLKOVÁ, R., BUREŠOVÁ, A., VANĚK, J. Plasma Surface Treatment and Modification of Glass Fibres. In Interfacial Phenomena in Composite Materials 2001. Bordeaux, France: ICMCB-CNRS UPR 9048, 2001. p. 118 ( p.)
Detail
ČECH, V., KÁBELOVÁ, B. Je mezifáze nejdůležitější součástí kompozitních materiálů?. In Nové stavební hmoty a výrobky. Brno: VÚSH Brno, 2001. s. 80 ( s.)
Detail
SVĚRÁK, T.; ŠTEVULOVÁ, N.; BEŇO, D. Cement Clinker Grinding Activator Adds. In the 4th International Conference for Conveying and Handling of Particulate Solids 2003. Budapest, Hungary: ORTRA, Tel Aviv, 2003. p. 8.63-8.68.
Detail
DANIEL, P., BUREŠOVÁ, A., ČECH, V. Základní charakteristiky vláken. In Reinforced Plastic. Karlovy Vary, ČR: Dům techniky PLzeň, s.r.o, 2003. s. 246 ( s.)
Detail
MÍČKOVÁ, H., BÁLKOVÁ, R., ČECH, V. Mechanické vlastnosti skleněných vláken. In Reinforced Plastic. Karlovy Vary, ČR: Dům techniky PLzeň, s.r.o, 2003. s. 251 ( s.)
Detail
KŘÍPAL, L.; PŘIKRYL, R.; INAGAKI, N.; ČECH, V. Adheze tenkých organokřemičitých vrstev na skleněných substrátech. In Reinforced Plastic. Karlovy Vary, ČR: Dům techniky PLzeň, s.r.o, 2003. s. 256 ( s.)
Detail
BÁLKOVÁ, R., PŘIKRYL, R., INAGAKI, N., ČECH, V. Vliv povrchových úprav skleněných vláken na pevnost kompozitní mezifáze ve smyku. In Reinforced Plastic. Karlovy Vary, ČR: Dům techniky PLzeň, s.r.o, 2003. s. 261 ( s.)
Detail
BÁLKOVÁ, R., SMRTKA, O., BUREŠOVÁ, A., ČECH, V., PODEŠVA, P. Stálost kompozitů vyztužených skleněnými vlákny ve vodném prostředí. In Reinforced Plastic. Karlovy Vary, ČR: Dům techniky PLzeň, s.r.o, 2003. s. 266 ( s.)
Detail
ČECH, V.; GORUPPA, A.; VANĚK, J.; JONES, F. Mechanical properties of pulsed-plasma polymerized vinyltriethoxysilane. In 16th International Symposium on Plasma Chemistry. Bari: Department of chemistry, University of Bari, 2003. p. 461 ( p.)
Detail
PŘIKRYL, R.; ČECH, V.; KŘÍPAL, L.; VANĚK, J. Plasma polymer adhesion and interfacial hydrolitical stability. In 16th International Symposium on Plasma Chemistry. Bari: Department of chemistry, University of Bari, 2003. p. 460 ( p.)
Detail
ČECH, V.; VANĚK, J. Low-elastic modulus plasma polymer film. In International Conference NANO'03 - Abstract booklet. Brno, ČR: FSI VUT v Brně, 2003. p. 34 ( p.)
Detail
ČECH, V.; JONES, F.; BÁLKOVÁ, R.; GORUPPA, A.; VANĚK, J.; PŘIKRYL, R. Functional nanostructures for composite interphases. In Functional nanostructures for composite interphases. Maďarsko: Maďarsko, 2003. p. 0 ( p.)
Detail
VANĚK, J.; BÁLKOVÁ, R.; ČECH, V.; BUREŠOVÁ, A.; PŘIKRYL, R. RF-Plasma technology for thin films preparation from VTEO-monomer. In Week of doctoral students 2002. Praha: MATFYZPRESS, 2002. p. 583 ( p.)ISBN: 80-85863-88-X.
Detail
BUREŠOVÁ, A., VANĚK, J., ČECH, V., PŘIKRYL, R. COMPARISON OF ADHESIVE ORGANOSILICON FILMS PREPARED BY DIFFERENT TECHNOLOGIES. In IV. Seminář Pokroky v anorganické chemii. MU Brno: Vydavatelství MU,Brno-Kraví Hora, 2002. p. 29 ( p.)ISBN: 80-210-2951-X.
Detail
ČECH, V. Analysis of Annealed Thin Polymer Films Prepared from Dichloro(methyl)phenylsilane by Plasma Polymerization. Journal of Applied Polymer Sciences, 2001, vol. 82, no. 9, p. 2106 ( p.)ISSN: 0021-8995.
Detail
ČECH, V. Determination of Density of Localized States in a-Si:H from the Time Relaxation of SCL Conductivity. physica status solidi, 2001, vol. 187, no. 2, p. 487 ( p.)ISSN: 0031-8965.
Detail
PŘIKRYL, R.; SALYK, O.; VANĚK, J.; STUDÝNKA, J.; ČECH, V. RF Plasma System for Continuous Surface Treatment and Modification of Fiber Bundles. Chemické listy, 2002, vol. 2002, no. 96, p. 250 ( p.)ISSN: 0009-2770.
Detail
VANĚK, J.; BUREŠOVÁ, A.; PŘIKRYL, R.; STUDÝNKA, J.; ČECH, V. Thin films of organosilicon monomers prepared by plasma polymerization and wet chemical process. Chemické listy, 2002, vol. 2002, no. 96, p. 225 ( p.)ISSN: 0009-2770.
Detail
BUREŠOVÁ, A.; ČECH, V.; BÁLKOVÁ, R.; PŘIKRYL, R.; VANĚK, J. Influence of Fiber Surface Treatment on Interfacial Adhesion in Glass Fiber/Polyester system. Chemické listy, 2002, vol. 2002, no. 96, p. 550 ( p.)ISSN: 0009-2770.
Detail
BÁLKOVÁ, R.; BUREŠOVÁ, A.; PŘIKRYL, R.; VANĚK, J.; SMRTKA, O.; ČECH, V. Adhesion Measurement By Microbond Technique. Chemické listy, 2002, vol. 2003, no. 96, p. 250 ( p.)ISSN: 0009-2770.
Detail
BÁLKOVÁ, R.; PŘIKRYL, R.; BUREŠOVÁ, A.; VANĚK, J.; ČECH, V. Plasma polymerized film of vinyltriethoxysilane as adhesion interlayer between glass fiber and polyester resin. Czechoslovak Journal of Physics, 2002, vol. 52, no. 6, p. 807 ( p.)ISSN: 0011-4626.
Detail
PŘIKRYL, R., SALYK, O., VANĚK, J., STUDÝNKA, J., ČECH, V. Surface processing of continuously moving fiber bundle using new helical coupled plasma system. Czechoslovak Journal of Physics, 2002, vol. 52, no. 6, p. 816-824. ISSN: 0011-4626.
Detail
PŘIKRYL, R.; ČECH, V.; BÁLKOVÁ, R.; VANĚK, J. Functional interlayers in multiphase materials. Surface and Coatings Technology, 2003, vol. 173-174, no. 173-174, p. 858-863. ISSN: 0257-8972.
Detail
BÁLKOVÁ, R.; ZEMEK, J.; ČECH, V.; VANĚK, J.; PŘIKRYL, R. XPS study of siloxane plasma polymer films. Surface and Coatings Technology, 2003, vol. 174-175, no. 174-175, p. 1159 ( p.)ISSN: 0257-8972.
Detail
ČECH, V.; PŘIKRYL, R.; BÁLKOVÁ, R.; VANĚK, J.; GRYCOVÁ, A. The influence of surface modifications of glass on glass fiber/polyester interphase properties. Journal of Adhesion Science and Technology, 2003, vol. 10, no. 17, p. 1299 ( p.)ISSN: 0169-4243.
Detail
SVĚRÁK, T.; GACHOVÁ, L.; MALYSZ, K. Calcium hydrate grinding as the part of the nanostructure process technology. Chemické listy, 2002, vol. 96, no. Symp, p. 218-222. ISSN: 0009-2770.
Detail
ČECH, V., PŘIKRYL, R. Měření adheze tenkých polymerních vrstev. Projekty FRVŠ. Brno: MŠMT ČR, 2001.
Detail
SVĚRÁK, T.; WICHTERLE, K.; CLEMENSOVÁ, G. Mechanické sítování aglomerovaného materiálu. jubilejní 50. národní konference s mezinárodní účastí CHISA 03, Srní 2003. Praha: 2003. s. C57 (C57 s.)ISBN: 80-86059-36-7.
Detail
SVĚRÁK, T. A study on linear shape of an industrial-scale tube mill for cement clinker. In Proceedings of XX.International congress CHISA 2004. Praha: 2004. p. 174-174. ISBN: 80-86059-40-5.
Detail
BÁLKOVÁ, R., PŘIKRYL, R. Mechanical Properties of Plasma Polymer Thin Films. In 13th Symposium on Application of Plasma Processes. Bratislava: Comenius University, Bratislava, 2001. p. 69 ( p.)ISBN: 8022315737.
Detail