Course detail
Designing of plastic products
FCH-MC_NVPAcad. year: 2024/2025
Relation between technological and economic possibilities of plastic technologies, quality of materials and product design. Effects of treatment technologies on the product qualities. Designing injected plastic moulded articles.
Language of instruction
Czech
Number of ECTS credits
3
Mode of study
Not applicable.
Guarantor
Department
Entry knowledge
Macromolecular chemistry
Structure and properties of macromolecules
Degradation, stabilization and additivation of polymers
Technology of plastic processing
Structure and properties of macromolecules
Degradation, stabilization and additivation of polymers
Technology of plastic processing
Rules for evaluation and completion of the course
The aim is a semestral work included the proposal of manufacturing of particular plastic part. The clasified credit is given after fullfil of partial works and final project.
Attendancy in lecture is recomended. Student elaborate some partial exersices dealed for example with shrinkage by injection molding etc. Finally student prepare individual project of new design of plastics product.
Attendancy in lecture is recomended. Student elaborate some partial exersices dealed for example with shrinkage by injection molding etc. Finally student prepare individual project of new design of plastics product.
Aims
The subject of the lecture-course is given to design the products made from plastics, otherwise the connexion between technologic and economic possibilities of plastic proccesing techniques. The target is ability to define material requirements a ability to create an own design of problem part solution for given application.
The aim is in complexe appraisal of material proposal and conclusion of problems in sence of economics, processing and utility of products, recyclation etc..
The aim is in complexe appraisal of material proposal and conclusion of problems in sence of economics, processing and utility of products, recyclation etc..
Study aids
Not applicable.
Prerequisites and corequisites
Not applicable.
Basic literature
Belovsky H.: Plastics: Product Design and Processing Engineering. Hanser Publishers, Munich 1995. (EN)
Fajgl J.: Navrhování výrobků z plastických hmot. SNTL, Praha 1964. (CS) (CS)
Malloy A. R.: Plastics Part Design for Injection Molding. Hanser Gardner Publications, München 1994. (CS) (EN)
Rosato V. D.: Designing with Plastics and Composites. Kluwer Academic Publishers, Boston 2000. (CS)
Šuba O.: Dimenzování a navrhování výrobků z plastů. Univerzita Tomáše Bati ve Zlíně, Zlín 2005. (CS)
Fajgl J.: Navrhování výrobků z plastických hmot. SNTL, Praha 1964. (CS) (CS)
Malloy A. R.: Plastics Part Design for Injection Molding. Hanser Gardner Publications, München 1994. (CS) (EN)
Rosato V. D.: Designing with Plastics and Composites. Kluwer Academic Publishers, Boston 2000. (CS)
Šuba O.: Dimenzování a navrhování výrobků z plastů. Univerzita Tomáše Bati ve Zlíně, Zlín 2005. (CS)
Recommended reading
Not applicable.
Elearning
eLearning: currently opened course
Classification of course in study plans
Type of course unit
Lecture
26 hod., optionally
Teacher / Lecturer
Syllabus
1. Shrinnkage
2. Internal tension
3. Defects of plastic products and their prevention
4. Foils and additives
5. Pipes and additives
6. Boards and pproducts of thereof
7. Bearing and binding profiles from thermoplastics
8. Pumps and fittings from thermoplastics
9. Surface treatment of plastics (machining)
10. Light-weight products, assignment of the student's project
11. Plastic assembly units, shaft connectors, sealing, springs and elastic elements
12. Plasticbearings, self-lubricating plastic elementss, tribological properties of plastics
13. Credit test, submission of the student's project
2. Internal tension
3. Defects of plastic products and their prevention
4. Foils and additives
5. Pipes and additives
6. Boards and pproducts of thereof
7. Bearing and binding profiles from thermoplastics
8. Pumps and fittings from thermoplastics
9. Surface treatment of plastics (machining)
10. Light-weight products, assignment of the student's project
11. Plastic assembly units, shaft connectors, sealing, springs and elastic elements
12. Plasticbearings, self-lubricating plastic elementss, tribological properties of plastics
13. Credit test, submission of the student's project
Guided consultation in combined form of studies
26 hod., optionally
Teacher / Lecturer
Elearning
eLearning: currently opened course