Publication detail

The influence of temperature and cyclic loading on adhesion in polycarbonate-polyurethane-glass adhesive joint

R. Balkova, T. Binar, J. Svarc, R. Mikulikova, P. Dostal

Original Title

Type

journal article in Web of Science

Language

English

Original Abstract

The paper deals with the influence of temperature and cyclic loading on adhesion and transparency of the adhesive joint consisting of soda-lime-silica glass and polycarbonate (PC) bonded with polyurethane (PU) adhesive film. The tested joint represents critical part of transparent armored glass used in vehicles. Dynamic tension creep tests were performed at temperatures to which armored glass is commonly exposed (25, 50, 60, 70, and 80 degrees C). Sawtooth loading mode was performed to 650N and the sine loading in the force range 0-1550N. The aim of the paper was to discover conditions causing delamination of the adhesive joint and glass milky appearance during the use. Delamination of soda-lime-silica glass/PU adhesive interface occurred at 25 degrees C after load to 1550N without the change of transparency. Both dynamic and static tension creep tests performed to 400N led to plastic deformation of PU adhesive at and above 70 degrees C, in preference at both ends and circumference edges of adhesive joint, and thus, to loss of transparency, but extent of deformation differed. Milky maps observed after sawtooth load to 650N at 80 degrees C reflected delaminated areas of highly deformed PU adhesive. Temperature of 70 degrees C was found out to be the critical parameter being in synergy effect with different thermal expansion of PC and PU adhesive.

Keywords

adhesive joint; glass; polycarbonate; polyurethane; temperature; static and dynamic tension creep test

Authors

R. Balkova, T. Binar, J. Svarc, R. Mikulikova, P. Dostal

Released

23. 4. 2019

Publisher

Taylor and Francis

ISBN

1568-5616

Periodical

Journal of Adhesion Science and Technology

Year of study

Number

State

Kingdom of the Netherlands

Pages from

1381

Pages to

1393

Pages count

URL

https://www-tandfonline-com.ezproxy.lib.vutbr.cz/doi/full/10.1080/01694243.2019.1575602

BibTex

@article{BUT155235,
  author="Radka {Bálková}",
  title="The influence of temperature and cyclic loading on adhesion in polycarbonate-polyurethane-glass adhesive joint",
  journal="Journal of Adhesion Science and Technology",
  year="2019",
  volume="33",
  number="13",
  pages="1381--1393",
  doi="10.1080/01694243.2019.1575602",
  issn="1568-5616",
  url="https://www-tandfonline-com.ezproxy.lib.vutbr.cz/doi/full/10.1080/01694243.2019.1575602"
}