Project detail

The use of non-destructive methods for testing of the condition of degraded alkali-activated concrete

Duration: 01.01.2019 — 31.12.2021

Funding resources

Czech Science Foundation - Standardní projekty

- whole funder (2019-01-01 - 2021-12-31)

On the project

Alkali-activated materials represent the future of the construction industry, especially due to processing of waste materials. Constructions from alkali-activated concrete can be exposed to various degradation processes (high and low temperatures, effects of water, chlorides, sulphates, acids and gases) that may adversely influence the internal or surface structure of the material. If alkali-activated concrete is exposed to such various degradation processes, its mechanical behaviour changes. The proposed project will deal with the use of non-destructive methods such as the acoustic emission method, impact-echo method and non-linear ultrasound spectroscopy for fast non-destructive testing of alkali-activated concrete that has been exposed to degradation processes. The results will subsequently be compared to the parameters obtained by thermogravimetric and differential thermal analysis, scanning electron microscopy, X-ray diffraction, flexural and compressive strength tests as well as density measurements.

Keywords
alkali-activated materials;degradation processes;acoustic non-destructive methods;mechanical behaviour;instrumentals methods;

Mark

19-04703S

Default language

English

People responsible

Bílek Vlastimil, Ing., Ph.D. - fellow researcher
Dvořák Richard, Ing., Ph.D. - fellow researcher
Hoduláková Michaela, Ing. et Ing. - fellow researcher
Hrubý Petr, Ing. - fellow researcher
Kalina Lukáš, doc. Ing., Ph.D. - fellow researcher
Keprdová Šárka, Ing., Ph.D. - fellow researcher
Kocáb Dalibor, Ing., Ph.D. - fellow researcher
Kucharczyková Barbara, doc. Ing., Ph.D. - fellow researcher
Pazdera Luboš, prof. Ing., CSc. - fellow researcher
Plšková Iveta, Mgr., Ph.D. - fellow researcher
Rovnaník Pavel, doc. RNDr., Ph.D. - fellow researcher
Šimonová Hana, doc. Ing., Ph.D. - fellow researcher
Topolář Libor, doc. Mgr., Ph.D. - principal person responsible

Units

Institute of Physics
- beneficiary (2018-04-01 - not assigned)

Results

PAZDERA, L.; TOPOLÁŘ, L.; DVOŘÁK, R.; HODULÁKOVÁ, M.; PLŠKOVÁ, I.; BÍLEK, V.; MIKULÁŠEK, K. Using modal-parameter-based analysis of the behaviour of alkali-activated material with surface degraded by ultraviolet radiation. In EXPERIMENTAL STRESS ANALYSIS - CONFERENCE PROCEEDINGS. 1. Brno University of Technology – Faculty of Mechanical Engineering: Czech Society for Mechanics, 2019. p. 378-383. ISBN: 978-80-214-5766-9.
Detail

TOPOLÁŘ, L.; PLŠKOVÁ, I.; DVOŘÁK, R.; HODULÁKOVÁ, M.; PAZDERA, L.; HRUBÝ, P. Sledování změn dynamických vlastností alkalicky aktivovaných materiálů při různých procesech degradace. DEFEKTOSKOPIE 2019 NDE for Safety. Praha: VUT v Brně a ČNDT z.s., 2019. s. 139-145. ISBN: 978-80-214-5799-7.
Detail

BÍLEK, V.; HRUBÝ, P.; HAJZLER, J.; KALINA, L.; DVOŘÁK, R.; TOPOLÁŘ, L. Barevné variace alkalické aktivace během její degradace. 2019. s. 1-31.
Detail

BÍLEK, V.; HRUBÝ, P.; HAJZLER, J.; KALINA, L.; PAZDERA, L.; TOPOLÁŘ, L. Kolorimetrické posuzování míry degradace alkalicky aktivovaných materiálů. 2019.
Detail

BÍLEK, V.; HAJZLER, J.; HRUBÝ, P.; KALINA, L.; HODULÁKOVÁ, M.; TOPOLÁŘ, L. Využití rtuťové intruzní porozimetrie pro charakterizaci degradovaných alkalicky aktivovaných materiálů. 2019.
Detail

KALINA, L.; BÍLEK, V.; BRADOVÁ, L.; TOPOLÁŘ, L. Blastfurnace Hybrid Cement with Waste Water Glass Activator: Alkali-Silica Reaction Study. Materials, 2020, vol. 13, no. 16, p. 1-9. ISSN: 1996-1944.
Detail

Dvorak R., Topolar L., Bilek V., Hruby P. Study of Latent Self-healing Ability of Sodium Hydroxide Activated Blast Furnace Slag Systems via Non-destructive Measurement. In Smart Innovation, Systems and Technologies. Smart Innovation, Systems and Technologies. 1. Huddersfield, UK: Springer, Cham, 2020. p. 915-926. ISBN: 978-3-030-57744-5. ISSN: 2190-3018.
Detail

HAJZLER, J.; BÍLEK, V.; HRUBÝ, P.; TOPOLÁŘ, L. Vliv aktivátoru na vývoj porozity alkalicky aktivované strusky během její degradace. Czech Chemical Society Symposium Series. 2020. ISSN: 2336-7210.
Detail

PLŠKOVÁ, I.; MATYSÍK, M.; TOPOLÁŘ, L.; BÍLEK, V. Influence of alkali-activated materials placement during curing on their dynamic parameters. In Dynamics of Civil Engineering and Transport Structures and Wind Engineering – DYN-WIND’2020. MATEC Web of Conferences. France: EDP Sciences, 2020. p. 1-8. ISSN: 2261-236X.
Detail

DVOŘÁK, R.; TOPOLÁŘ, L.; PAZDERA, L.; BÍLEK, V.; HRUBÝ, P.; PLŠKOVÁ, I. Modal Analysis of Alkali Activated Slab Degraded by Ultraviolet Light. In Experimental Stress Analysis - 58th International Scientific Conference, EAN 2020. 1. Ostrava, Czech: Czech Society for Mechanics, 2020. p. 55-63. ISBN: 978-80-248-4451-0.
Detail

PLŠKOVÁ, I.; MATYSÍK, M.; TOPOLÁŘ, L.; HRUBÝ, P. NDT Monitoring of Alkali-activated Material Carbonation. In Rehabilitation and Reconstruction of Buildings III. Key Engineering Materials (print). Michaela Kostelecká. Switzerland: Trans Tech Publications Ltd., 2020. p. 45-50. ISBN: 9783035736533. ISSN: 1013-9826.
Detail

DVOŘÁK, R.; TOPOLÁŘ, L. Effect of Hammer Type on Generated Mechanical Signals in Impact-Echo Testing. Materials, 2021, vol. 14, no. 3, p. 1-19. ISSN: 1996-1944.
Detail

HRUBÝ, P.; BÍLEK, V.; KALINA, L.; ŠOUKAL, F.; TOPOLÁŘ, L.; DVOŘÁK, R. The Influence of Alkaline Activator Type on the Carbonatation process of the Alkali-activated Blast Furnace Slag. Studentská odborná konference - CHEMIE JE ŽIVOT - sborník abstraktů. Brno: Vysoké učení technické v Brně, Fakulta chemická, Purkyňova 464/118, 612 00 Brno, 2020. p. 73-74. ISBN: 978-80-214-5920-0.
Detail

DVOŘÁK, R.; HRUBÝ, P.; TOPOLÁŘ, L. Characterization of Carbonatation Rate of Alkali-Activated Blast Furnace Slag in Various Environments. In Binders, Materials and Technologies in Modern Construction VII. Solid State Phenomena. Switzerland: Trans Tech Publications Ltd, 2021. p. 40-46. ISBN: 978-3-0357-3870-4. ISSN: 1012-0394.
Detail

PAZDERA, L.; TOPOLÁŘ, L.; HODULÁKOVÁ, M.; DVOŘÁK, R. METODA AKUSTICKÉ EMISE APLIKOVANÁ NA ZATĚŽOVANÉ VZORKY MALT. Defektoskopie 2021 Sbornik prispevku 51. mezinárodní konference a výstava NDT techniky. 1. Praha, Cesko: Czech Society for Nondestructive Testing, 2021. s. 53-62. ISBN: 978-80-214-5988-5.
Detail

HAJZLER, J.; HRUBÝ, P.; BÍLEK, V.; TOPOLÁŘ, L. Assessment of Degradation of Alkali-Activated Blast Furnace Slag Progress Using the Mercury Intrusion Porosimetry. Studentská odborná konference CHEMIE JE ŽIVOT 2021 Sborník abstraktů. Brno: Vysoké učení technické v Brně, Fakulta chemická, 2021. p. 75-76. ISBN: 978-80-214-6002-7.
Detail

PLŠKOVÁ, I.; HRUBÝ, P.; TOPOLÁŘ, L.; MATYSÍK, M. Degradation of Materials Based on Alkali-Activated Blast-Furnace Slag after Exposure to Aggressive Environments. In Binders, Materials and Technologies in Modern Construction VII. Solid State Phenomena. Switzerland: Trans Tech Publications Ltd., 2021. p. 131-136. ISSN: 1662-9779.
Detail

HRUBÝ, P.; BÍLEK, V.; TOPOLÁŘ, L.; KALINA, L.; MARKO, M.; ŠOUKAL, F.; DVOŘÁK, R.; HERČÍK, T. Decalcification resistance of various alkaliactivated materials. In IOP Conference Series: Materials Science and Engineering. IOP Conference Series: Materials Science and Engineering. Bristol: IOP Publishing, 2021. p. 1-8. ISSN: 1757-8981.
Detail

HRUBÝ, P.; KALINA, L.; BÍLEK, V.; TOPOLÁŘ, L.; MARKO, M.; HERČÍK, T. DEGRADATION RESISTANCE OF ALKALI-ACTIVATED BLAST FURNACE SLAG. Chémia a technológie pre život. Bratislava: Slovenská chemická knižnica, 2021. ISBN: 978-80-8208-064-6.
Detail

HRUBÝ, P.; KALINA, L.; BÍLEK, V.; KEPRDOVÁ, Š.; MÁSILKO, J.; PLŠKOVÁ, I.; KOPLÍK, J.; TOPOLÁŘ, L. Comparison of Testing Methods for Evaluating the Resistance of Alkali-Activated Blast Furnace Slag Systems to Sulfur Dioxide. Materials, 2022, vol. 15, no. 4, p. 1-16. ISSN: 1996-1944.
Detail

PAZDERA, L.; TOPOLÁŘ, L.; DVOŘÁK, R.; HODULÁKOVÁ, M. Analysis of Acoustic Emission Pressure Test of Mortar Specimens with Different Materials. In EAN 2021 - 59th International Scientific Conference on Experimental Stress Analysis - Book of Full Papers. 1. Prague: Czech Technical University, 2021. p. 173-181. ISBN: 978-80-01-06885-4.
Detail

HRUBÝ, P.; BÍLEK, V.; TOPOLÁŘ, L.; KALINA, L.; ILIUSHCHENKO, V.; KOPLÍK, J.; MÁSILKO, J.; ŠOUKAL, F. Resistance of alkali-activated blast furnace slag to acids. In IOP Conference Series: Materials Science and Engineering. Journal of Physics: Conference Series. Telč: IOP Publishing, 2022. p. 1-8. ISSN: 1742-6596.
Detail

TOPOLÁŘ, L.; KOCÁB, D.; HRUBÝ, P.; JAKUBKA, L.; HODULÁKOVÁ, M.; HALAMOVÁ, R. The Effect of Specimen Size on Acoustic Emission Parameters and Approximate Position of Defects Obtained during Destructive Testing of Cementitious and Alkali-Activated Degraded Fine-Grained Materials. Materials, 2023, vol. 16, no. 9, p. 1-17. ISSN: 1996-1944.
Detail

DVOŘÁK, R.: Impact-Echo signals generated by hammer with different tip and handle type. (výzkumná data)
Detail

Responsibility: Topolář Libor, doc. Mgr., Ph.D.