Detail publikace
Alkali-activated Slag Mortar Containing Alternative Activator: Long-Term Mechanical Fracture Parameters
ŠIMONOVÁ, H. KUCHARCZYKOVÁ, B. BÍLEK, V. KOCÁB, D.
Originální název
Alkali-activated Slag Mortar Containing Alternative Activator: Long-Term Mechanical Fracture Parameters
Typ
článek v časopise - ostatní, Jost
Jazyk
angličtina
Originální abstrakt
This paper deals with the determination of long-term mechanical fracture properties of alkali-activated slag (AAS) mortars with the alternative activator. Waste sludge from the production of waterglass was used as a sole alkaline activator for ground granulated blast furnace slag. Two types of sand were used to prepare two different mortar sets: standardized siliceous CEN sand consisting of three fractions according to EN 196-1 and natural sand with a nominal grain size up to 4 mm. The results of the elastic, fracture and strength parameters for both sets of AAS mortars determined within the time interval of 3 to 650 days of ageing are summarized in the paper. The obtained results show a different trend in the development of the material properties of AAS mortars compared to the ordinary cement-based mortars which should be taken into the account in the material specification for practical application. It seems that the hardening process influencing the mechanical fracture characteristics is more progressive after the age of 28 days.
Klíčová slova
Alkali-activation, fracture, mortar, slag, waste sludge.
Autoři
ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; BÍLEK, V.; KOCÁB, D.
Vydáno
31. 12. 2020
Nakladatel
VSB - Technical University of Ostrava, Faculty of Civil Engineering
Místo
Ostrava
ISSN
1213-1962
Periodikum
Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava
Ročník
2020
Číslo
2
Stát
Česká republika
Strany od
28
Strany do
35
Strany počet
8
URL
BibTex
@article{BUT168019,
author="Hana {Šimonová} and Barbara {Kucharczyková} and Vlastimil {Bílek} and Dalibor {Kocáb}",
title="Alkali-activated Slag Mortar Containing Alternative Activator: Long-Term Mechanical Fracture Parameters",
journal="Sborník vědeckých prací Vysoké školy báňské – Technické univerzity Ostrava",
year="2020",
volume="2020",
number="2",
pages="28--35",
doi="10.35181/tces-2020-0014",
issn="1213-1962",
url="http://tces.vsb.cz/Home/ArticleDetail/506"
}