Detail publikace
Fracture toughness evaluation of a cracked au thin film by applying a finite element analysis and bulge tes
TINOCO, H.A. HUTAŘ, P. MERLE, B. GOKEM, M. KRUML, T.
Originální název
Fracture toughness evaluation of a cracked au thin film by applying a finite element analysis and bulge tes
Typ
článek v časopise ve Scopus, Jsc
Jazyk
angličtina
Originální abstrakt
This paper presents a finite element analysis of a pre-cracked freestanding gold thin film subjected to bulge test. These tests were conducted in order to determine the elasto-plastic properties and fracture toughness of the gold films. For the experimental tests, a pre-crack was introduced in the center of the film by focused ion beam (FIB) milling with a length of 10 µ m and a width of 100nm. For the numerical fracture analysis, the problem was divided into two stages; the first stage was the development of the numerical model on the whole film without pre-crack (elasto-plastic analysis) and the second one was performed on a film portion that included the pre-crack (sub-modeling stage). Three different notches (rounded, sharp and V-sharp) were applied to calculate the stress intensity factor around the crack tip using path independent J-integral. The obtained results show that the load-deflection curves for non-cracked and pre-cracked film reproduced the experiments using the calculated elasto-plastic properties. This indicates that the proposed models presented a good correlation and robustness. Additionally, fracture toughness values were calculated between 0.288 0.5 and 0.303 MPa. m0.5 with J-integral values 1.037 J/m2 (elastic) and 1.136 J/m2 (elasto-plastic) which correspond with other calculations available in the literature.
Klíčová slova
Bulge test, Finite element analysis, Fracture toughness, Gold film,Thin films
Autoři
TINOCO, H.A.; HUTAŘ, P.; MERLE, B.; GOKEM, M. KRUML, T.
Vydáno
11. 12. 2019
Nakladatel
Trans Tech Publications Ltd
ISSN
1013-9826
Periodikum
Key Engineering Materials (print)
Ročník
827
Číslo
1
Stát
Švýcarská konfederace
Strany od
196
Strany do
202
Strany počet
7
URL
BibTex
@article{BUT165773,
author="TINOCO, H.A. and HUTAŘ, P. and MERLE, B. and GOKEM, M. KRUML, T.",
title="Fracture toughness evaluation of a cracked au thin film by applying a finite element analysis and bulge tes",
journal="Key Engineering Materials (print)",
year="2019",
volume="827",
number="1",
pages="196--202",
doi="10.4028/www.scientific.net/KEM.827.196",
issn="1013-9826",
url="https://www.scientific.net/KEM.827.196"
}Dokumenty