Detail publikace
Fracture parameters of fine-grained composites based on the alkali-activated slag
BÍLEK, V. ŠIMONOVÁ, H. KUCHARCZYKOVÁ, B. KOCÁB, D. KERŠNER, Z.
Originální název
Fracture parameters of fine-grained composites based on the alkali-activated slag
Typ
článek ve sborníku ve WoS nebo Scopus
Jazyk
angličtina
Originální abstrakt
The paper deals with the experimental determination of fracture parameters of the composites based on the alkali-activated slag (AAS) at different ages. The main aim of the experimental investigation was to verify the effect of the addition of shrinkage reducing admixture (SRA) on the overall progress of length changes and fracture properties during AAS composites ageing. Two AAS composites, which differed only in the presence of SRA, were prepared for the purpose of experiments. The mechanical fracture parameters were determined using evaluation of fracture tests carried out on 40 × 40 × 160 mm beam specimens with an initial central edge notch. The monitored parameters were modulus of elasticity, effective fracture toughness and specific fracture energy. These parameters were determined at the age of 3, 28 and 90 days. The obtained results are supplemented by the results of relative length changes measurements performed on both studied composites.
Klíčová slova
fracture, alkali activation, slag, composite, shrinkage reducing admixture
Autoři
BÍLEK, V.; ŠIMONOVÁ, H.; KUCHARCZYKOVÁ, B.; KOCÁB, D.; KERŠNER, Z.
Vydáno
12. 7. 2018
Nakladatel
IOP Publishing
Místo
Bristol
ISSN
1757-8981
Periodikum
IOP Conference Series: Materials Science and Engineering
Ročník
379
Číslo
1
Stát
Spojené království Velké Británie a Severního Irska
Strany od
1
Strany do
7
Strany počet
7
URL
Plný text v Digitální knihovně
BibTex
@inproceedings{BUT148835,
author="Vlastimil {Bílek} and Barbara {Kucharczyková} and Hana {Šimonová} and Dalibor {Kocáb} and Zbyněk {Keršner}",
title="Fracture parameters of fine-grained composites based on the alkali-activated slag",
booktitle="International Conference Building Materials, Products and Technologies",
year="2018",
journal="IOP Conference Series: Materials Science and Engineering",
volume="379",
number="1",
pages="1--7",
publisher="IOP Publishing",
address="Bristol",
doi="10.1088/1757-899X/379/1/012018",
issn="1757-8981",
url="http://iopscience.iop.org/article/10.1088/1757-899X/379/1/012018"
}