Detail publikace

SECONDARY COOLING OVERLAPPED WITH BEARING HOUSING IN A CONTINUOUS CASTER

KOMÍNEK, J. LUKS, T. POHANKA, M. RAUDENSKÝ, M. HWANG, J-Y.

Originální název

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

This article deals with the secondary cooling in a continuous caster. In particular, it deals with homogeneity / inhomogeneity in places where surface of slab is partial shielded by rollers and bearing pocket between rollers. Influence of gap between rollers was also considered. Homogeneity of cooling intensity distribution was experimentally studied in two stages (cold and hot tests). In the first stage (cold tests) water flow and water distribution was observed optically using a transparent board with studied surface structures (rollers and bearing pockets). In the second stage (hot tests) the cooling tests with steel plate (fitted with studied structures) were performed. Cooling homogeneity were studied based on temperature distribution of the non-cooled side of sample, which was recorded by infrared camera.

Klíčová slova

continuous caster, cooling homogeneity, measurement, infrared camera

Autoři

KOMÍNEK, J.; LUKS, T.; POHANKA, M.; RAUDENSKÝ, M.; HWANG, J-Y.

Vydáno

23. 5. 2018

Nakladatel

Tanger, Ostrava

Místo

Ostrava

ISBN

978-80-87294-83-3

Kniha

Sborník konference METAL 2018

Strany od

Strany do

Strany počet

BibTex

@inproceedings{BUT147780,
  author="KOMÍNEK, J. and LUKS, T. and POHANKA, M. and RAUDENSKÝ, M. and HWANG, J-Y.",
  title="SECONDARY COOLING OVERLAPPED WITH BEARING HOUSING IN A CONTINUOUS CASTER",
  booktitle="Sborník konference METAL 2018",
  year="2018",
  pages="1--6",
  publisher="Tanger, Ostrava",
  address="Ostrava",
  isbn="978-80-87294-83-3"
}