Detail publikace

Effect of electron beam remelting to microstructure and phase modification of HVOF and CGDS CoNiCrAlY coatings

GAVENDOVÁ, P. DLOUHÝ, I. ČÍŽEK, J. ČUPERA, J. HANUSOVÁ, P.

Originální název

Typ

článek ve sborníku ve WoS nebo Scopus

Jazyk

angličtina

Originální abstrakt

This paper deals and compare the mictrostructure of CoNiCrAlY coatings manufactured by the high-velocity oxygen-fuel (HVOF) and cold gas dynamic spraying (CGDS) deposition technique after electron beam (EB) remelting. HVOF and CGDS spraying method was used in order to obtain very dense and good adhesive CoNiCrAlY-coatings deposited onto nickel-based alloy. The electron beam remelting process is one of the most convenient processes to reduce the disadvantages of thermal spray coatings. The effect of high-energy electron beam irradiation on surface remelting and microstructural modification in CoNiCrAlY bond coats are investigated in this study. A subsequent remelting of the both HVOF and CGDS – coatings by electron beam irradiation has proven to minimize the porosity modifications in the morphology and the phase composition of the CoNiCrAlY bond coats. The surface was remelted up to a depth of approximately 100 . Scanning Electron Microscopy, light microscopy and X-ray Diffraction were performed to characterize the phase modification and morphology before and after treatment. The results obtained in this study show following: There are advantages at using the pulsed electron beam surface modification technique. EB-treatment provides a smooth surface with low porosity level. The as-sprayed CGDS and HVOF coatings exhibit similar microstructures. From these results, it appears that potential improvements of deposition the bond coat can be also achieved using low-temperature processing method such as CGDS.

Klíčová slova

Bond coat, cold spray, HVOF spraying, EB remelting, CoNiCrAlY coating

Autoři

GAVENDOVÁ, P.; DLOUHÝ, I.; ČÍŽEK, J.; ČUPERA, J.; HANUSOVÁ, P.

Rok RIV

2015

Vydáno

25. 5. 2015

Nakladatel

Associazione Italia di Metallurgia

Místo

Italy

ISBN

978-88-98990-03-0

Kniha

Heat Treatment and Surface Engineering from tradition to innovation

ISSN

NEUVEDENO

Strany od

152

Strany do

159

Strany počet

BibTex

@inproceedings{BUT115229,
  author="Petra {Krajňáková} and Ivo {Dlouhý} and Jan {Čížek} and Jan {Čupera} and Petra {Hanusová}",
  title="Effect of electron beam remelting to microstructure and phase modification of HVOF and CGDS CoNiCrAlY coatings",
  booktitle="Heat Treatment and Surface Engineering from tradition to innovation",
  year="2015",
  pages="152--159",
  publisher="Associazione Italia di Metallurgia",
  address="Italy",
  isbn="978-88-98990-03-0"
}