Detail publikace
The effect of rubber aggregates and acrylic polymer binder on the durability of modified cement mortars subjected to acid attack
TUPÝ, M. SOTIRIADIS, K. ŽIŽKOVÁ, N. PETRÁNEK, V.
Originální název
The effect of rubber aggregates and acrylic polymer binder on the durability of modified cement mortars subjected to acid attack
Typ
článek ve sborníku ve WoS nebo Scopus
Jazyk
angličtina
Originální abstrakt
The effect of rubber aggregates and acrylic polymer binder on the durability of modified cement mortars exposed to acid solutions was investigated. Mortar specimens were prepared with a type CEM I cement and siliceous sand, as well as by substituting 25% of sand with shredded automobile tires and by adding acrylic polymer binder in two percentages (10% and 20% w/w of the cement mass). Some of the specimens were only air cured, at laboratory conditions, and their compressive strength and water absorption were determined. The rest specimens were immersed in acid solutions (hydrochloric acid, sulfate acid, nitric acid), after 28 days of initial air curing, and stored at laboratory temperature. Compressive strength tests, mass measurements and visual inspection took place for 28 days. The results showed that the use of rubber aggregates resulted in significantly lower compressive strength values in comparison to the reference mortar. Rubber aggregates decreased water absorption; the use of acrylic polymer binder further reduced it. The compressive strength values were lower for the specimens stored in CA solution, followed by SA and NA solutions. Mass loss was higher for the specimens stored in SA solution, followed by CA and NA solutions. The specimens without polymer binder showed similar mass loss. In general, the addition of acrylic polymer binder decreased strength and mass loss of the mortars attacked by acids.
Klíčová slova
Mortar, Rubber aggregates, Acrylic polymer binder, Durability, Acid attack
Autoři
TUPÝ, M.; SOTIRIADIS, K.; ŽIŽKOVÁ, N.; PETRÁNEK, V.
Rok RIV
2014
Vydáno
15. 3. 2014
Nakladatel
DEStech Publications, Inc.
Místo
USA
ISBN
978-1-60595-171-3
Kniha
International Conference on Material Science and Material Engineering
Edice
1
Číslo edice
2014
Strany od
324
Strany do
329
Strany počet
5
URL
BibTex
@inproceedings{BUT103869,
author="Michael {Tupý} and Konstantinos {Sotiriadis} and Nikol {Žižková} and Vít {Petránek}",
title="The effect of rubber aggregates and acrylic polymer binder on the durability of modified cement mortars subjected to acid attack",
booktitle="International Conference on Material Science and Material Engineering",
year="2014",
series="1",
number="2014",
pages="324--329",
publisher="DEStech Publications, Inc.",
address="USA",
isbn="978-1-60595-171-3",
url="http://books.google.cz/books?id=8nO5AwAAQBAJ&printsec=frontcover&hl=el#v=onepage&q&f=false"
}